BMC Kaius 01 Two
€7,999.00
-
Currently not available
-
Fast delivery!
-
Convenient financing with easyCredit instalment purchase
-
100,000+ satisfied customers
-
Pay only after 30 days further information
| Frame | Kaius 01 Gen 2 | 01 Premium Carbon with Aerocore Design | ICS Technology Stealth Cable Routing | Full Mount - UDH | TCC Race Compliance Level | Flat Mount Disc | 12 x 142mm Thru-Axle |
| Material | Carbon |
| Weight | approx. 7.80 kg (excluding pedals) |
| Fork | Kaius 01 Gen 2 | 01 Premium Carbon | ICS Technology, Stealth Cable Routing | TCC Race Compliance Level | Stealth Dropout Design | Flat Mount Disc | 12 x 100mm Thru-Axle |
| Manufacturer shift group | Sram |
| Rear derailleur | SRAM Force XPLR AXS (RD-FRC-1E-E1) |
| Number of gears | 1 x 13 |
| Crank handle | SRAM Force AXS Wide (FC-FRC-1WP-E1), 42T, SRAM Force XPLR AXS Power Meter | Single Side (FC-FRC-1WP-E1) |
| Cassette | SRAM Force XPLR (CS-XG-1371-E1) 10-46T |
| Pedals included in the scope of delivery | nein |
| Gear lever | SRAM Force AXS (ED-FRC-E1) |
| Rims | CG 39 Carbon | Tubeless Ready | 39mm |
| Hubs | CG 39 | Star Ratchet System | Straight-pull design | Centre Lock |
| Wheel size | 28 Zoll |
| Tyres | Continental Terra Competition Race Rapid | Tubeless | 45mm |
| Brakes | SRAM Force AXS (ED-FRC-E1), SRAM CenterLine X rotor (RT-CLN-X-A2), 160 / 160 mm |
| Handlebars | ICS Carbon Aero Gen 2 | One-piece full carbon cockpit | 135mm drop, 81mm reach, 12° flare |
| Seat post | Teammachine SLR 01 Gen 5 | 01 Premium Carbon Aero-shaped Seatpost | 0mm offset (sizes 47–51) and 10mm offset (sizes 54–61) |
| Saddle | Fizik Vento Argo X3 | Kium rails | 140mm |
| Stem | ICS Carbon Aero Gen 2 | One-piece full carbon cockpit | 135mm drop, 81mm reach, 12° flare |
Designed for racing from the outset, the Kaius 01 TWO builds on the standard set by our first Kaius for speed on loose surfaces - with even more stability, more efficiency and more confidence at high speed.
The aerodynamics were further refined in the Impec Lab, resulting in an improvement of 7% at 40 km/h. The 01 Premium Carbon frame improves power transmission and at the same time provides more confidence on rough terrain. More compliance, 52 mm tyre clearance and optimised high-speed stability give you the ability to approach corners aggressively and stay on when the race gets selective.
Rounded out by the SRAM Force XPLR AXS groupset with full-mount rear derailleur and power meter, this gravel bike is ready for racing stress. The Next-Gen ICS Carbon Aero cockpit supports your racing position at the front, while our CG39 Carbon Tubeless-Ready wheelset maintains high speed - even when the surface gets rough.
Race Ready Geometry
On race day, you don't have to worry about the track. Our geometry keeps you fast on any terrain: precise up front, stable at high speed and ready for the wider tyres that characterise modern gravel racing - chaotic but fast.
Faster with more control
Gravel racing is evolving - and so is our tyre clearance. Bigger tyres mean more speed and more traction. This gives you the confidence to attack corners and rough terrain without compromise.
ICS Carbon Aero Cockpit
Developed with the Tudor Pro Cycling Team - this ICS Aero Cockpit is made by racers for racers: stiffer, more aerodynamic, more comfortable, more versatile adjustable and easier to fit. And yes, it looks great too.
Flexible
Wider tyres? Check. Flatter steering angle? Check. Optimised carbon layup? Check. You get the ideal mix of stiffness and compliance for every terrain - whether in Spain's deserts or on long US gravel tracks.
This bike arrives (almost) fully assembled. All you have to do is straighten the handlebars and attach the pedals.
More on statutory warranty rights (europa.eu)
Log in
Safety information for bicycles, e-bikes and children’s bikes
Safe and long-term use of bicycles, e-bikes and children’s bikes requires careful checks, regular maintenance and proper handling. These guidelines provide practical recommendations for safe use and should be followed in conjunction with the manufacturer’s operating instructions.
1. Safety checks before riding
The following checks should be carried out before every ride :
Brakes and steering : Test that the brakes are working properly and ensure that the steering is smooth and stable.
Tyres and wheels : Check that the tyre pressure is correct and that the wheels and quick-release skewers are securely fastened.
Fittings : Check that attachments such as mudguards, luggage racks, saddles and pedals are securely fastened.
Accessories and loading : Ensure that luggage and accessories are correctly fitted and that the maximum load capacity is not exceeded.
2. Technical safety and permitted use
Component inspection: Regularly check safety-critical components such as the frame, fork, handlebars, seat post and brakes for damage. Do not use the bicycle if there are any visible defects.
Maximum load capacity : Observe the weight restrictions for the total weight (bicycle, rider, load and, if applicable, trailer). You will find the specifications in the manufacturer’s information.
Proper use : Only use the bicycle or e-bike within the intended category of use. Improper use leads to safety risks.
Accessories and modifications : Only use approved accessories such as child seats or trailers, and do not make any unauthorised modifications, particularly to the drive system of e-bikes.
3. Special instructions for e-bikes
Battery and charging:
Only use batteries and chargers approved by the manufacturer.
Charge the battery in safe locations and in accordance with the temperature specifications.
Remove the battery before transporting the e-bike.
Electric assistance:
Familiarise yourself with the assistance modes and the push assist. Test the e-bike first in a safe environment, particularly with varying loads or difficult ground conditions.
Running-in disc brakes:
Run in new brakes before your first long ride to ensure optimum braking performance.
Transport guidelines:
When transporting the bike, follow the manufacturer’s instructions and comply with legal regulations.
Component manuals:
For detailed information on e-bike systems from drive component manufacturers, please see here:
For Fazua motors:
https://fazua.com/de/support/help-center/knowledge-base/fazua-app/
For Bosch motors:
https://help.bosch-ebike.com/de/help-center#wss-manuals
For Shimano motors:
https://lifestylebike.shimano.com/de/support/
4. Special safety rules for children’s bicycles
Duty of supervision: Children must only use bicycles under the supervision of a responsible adult.
Suitable size and equipment : Ensure that the bicycle is age-appropriate and that all safety features (e.g. brakes, reflectors, chain guard) are in good working order.
Loading and accessories : Securely attach child seats and luggage racks and ensure that the load capacity is not exceeded.
5. Care and maintenance
Cleaning : Use a soft cloth and mild cleaning agents. Avoid high-pressure washers to prevent damage to electrical and mechanical components.
Regular inspections : Schedule regular maintenance with a qualified specialist to check for wear and tear and ensure safety.
Spare parts : Use only original or approved spare parts to maintain the functionality of the bicycle.
6. What to do after your ride
Document any damage : If there is any visible damage or malfunction, the bicycle must not be used any further. Have it checked by a specialist workshop.
Avoid hot components : Avoid contact with hot components such as brake discs or drive units to prevent burns.
Final notes
This safety information provides you with a comprehensive overview of the safe use of bicycles, e-bikes and children’s bikes. Always follow the manufacturer’s instructions for use and contact a specialist dealer if you have any questions. Safe and responsible use not only ensures your safety but also extends the life of your bike.
Online and on site
flexibly
performance ratio