Mondraker NEAT RR SL TQ HPR-50 360Wh
-
Available immediately, with you in 7 - 9 working days
-
Fast delivery!
-
Convenient financing with easyCredit instalment purchase
-
100,000+ satisfied customers
-
Pay only after 30 days further information
| Frame | Stealth Air Full Carbon, updated Zero Suspension System, 150 mm travel, Forward Geometry, integrated and removable battery, 12 x 148 mm Boost rear axle, tapered head tube, one-piece Monoblock upper rocker, internally routed cables and hoses (HHG), sealed ‘MAX-Capacity’ bearings, extra-large 15 mm axles, speed sensor integrated into the dropout, exclusive plastic motor covers. |
| Frame shape | Mountainbike |
| Material | Carbon |
| Gender | Unisex |
| Weight | approx. 18.3 kg |
| permissible total weight | 150 kg |
| Fork | Fox 36 29 Float GRIPX2 Factory Kashima, 160 mm, tapered steerer tube, 15 x 110 mm Boost Kabolt axle, 44 mm offset. Adjustments: high- and low-speed compression, high- and low-speed rebound, air preload |
| Damper | Fox Float X Factory Kashima EVOL, 185 x 55 mm. Adjustments: Compression damping with 2 modes (Open/Firm), rebound damping, air preload. Trunnion mount at the top, lower bushings: 30 x 8 mm |
| Manufacturer shift group | Sram |
| Rear derailleur | SRAM XX Eagle AXS, T-type roller bearing clutch, cage lock, long carbon cage, 1x12-speed |
| Number of gears | 1 x 12 |
| Circuit type | Kettenschaltung |
| Crank handle | e*thirteen TRS Race Carbon E-bike, all sizes: 160 mm |
| Cassette | SRAM XG-1295, 10-52T, T-Type, 12-speed |
| Drive type | Kettenantrieb |
| Freewheel/coaster | Freilauf |
| Pedals included in the scope of delivery | nein |
| Rims | Mavic E-CrossTrail SL Carbon, 29 Boost, 30 mm internal width, hookless, tubeless-ready, 28 spokes |
| Hubs | Front: Mavic Infinity hub, Boost 15 x 110 mm, IS 6-bolt, Rear: Mavic Infinity hub, ID360 freehub technology, Boost 12 x 148 mm, IS 6-bolt, XD freehub |
| Wheel size | 29 Zoll |
| Tyres | Front: Maxxis Minion DHF 29 x 2.5 WT, Tubeless Ready, 3C MaxxGrip rubber compound, EXO+ Protection, 60 TPI, folding bead; Rear: Maxxis Minion DHR II 29 x 2.5 WT, Tubeless Ready, 3C MaxxTerra rubber compound, EXO+ Protection, 60 TPI, folding bead |
| Motor manufacturer | TQ |
| Engine | TQ HPR-50 |
| max. torque | 50 Nm |
| Reach | up to 80 km |
| Support for | up to 25 km/h |
| Battery | TQ HPR-50 360 Wh, built-in and removable |
| Display | TQ HPR Display V01 |
| Brakes | Shimano XTR M9120, 4-piston caliper, RTMT905 Ice-Tech 203 mm one-piece IS 6-hole brake disc, synthetic resin brake pads with fin |
| Handlebars | ONOFF S9 1.0 Carbon, rise: 25 mm, width: 800 mm, 8° horizontal bend/backsweep, 5° vertical bend/upsweep, 31.8 mm handlebar diameter. Sizes L and XL: rise 1.5. |
| Seat post | RockShox Reverb Stealth AXS, diameter 31.6 mm, size S: 340 x 125 mm, size M: 390 x 150 mm, size L: 440 x 170 mm, size XL: 440 x 170 mm |
| Saddle | Fizik Terra Aidon Slim X5 |
| Stem | ONOFF S9 30 mm 0°, fully CNC-machined, 31.8 mm handlebar diameter |
| Accessories/Miscellaneous | Charger included |
A new era of e-bikes has begun. The new NEAT is a Mondraker bike through and through. It’s right at home in a new category that’s practically begging to bear the Mondraker stamp.
The brand-new Mondraker NEAT is powered by the TQ-HPR50 motor and fed by an integrated, removable 360Wh battery. Lightweight e-MTB fun without compromise, but with all Mondraker technologies, and weighing under 20kg. Mission accomplished. Now it’s your turn.
All NEAT models are based on the same frame made from STEALTH AIR CARBON and the TQ-HPR50 drive with its integrated yet removable 360Wh battery. There are three trim levels: the NEAT R, NEAT RR and the top-of-the-range NEAT RR SL.
The NEAT is the perfect combination of our two signature models: the FOXY Carbon Enduro Bike and the Crafty Carbon e-MTB Enduro Bike. Its distinctive aesthetics, technology and unrivalled performance on the trail make the NEAT the benchmark for modern light e-MTBs.
The NEAT embodies what we understand to be the definition of the light e-MTB category and combines it with our very own MONDRAKER DNA:
- The fusion of non-motorised enduro bikes with ‘full power’ e-MTBs.
- The result is a 150mm enduro bike with a 160mm fork and enough motor power to make every ride even more fun. Lightweight, but not at any cost.
This bike arrives (almost) fully assembled. All you need to do is straighten the handlebars and fit the pedals.
Log in
Safety information for bicycles, e-bikes and children’s bikes
Safe and long-term use of bicycles, e-bikes and children’s bikes requires careful checks, regular maintenance and proper handling. These guidelines provide practical recommendations for safe use and should be followed in conjunction with the manufacturer’s operating instructions.
1. Safety checks before riding
The following checks should be carried out before every ride :
Brakes and steering : Test that the brakes are working properly and ensure that the steering is smooth and stable.
Tyres and wheels : Check that the tyre pressure is correct and that the wheels and quick-release skewers are securely fastened.
Fittings : Check that attachments such as mudguards, luggage racks, saddles and pedals are securely fastened.
Accessories and load : Ensure that luggage and accessories are correctly fitted and that the permissible load limit is not exceeded.
2. Technical safety and permitted use
Component inspection: Regularly check safety-critical components such as the frame, fork, handlebars, seat post and brakes for damage. Do not use the bicycle if there are any visible defects.
Maximum load capacity : Observe the weight restrictions for the total weight (bicycle, rider, load and, if applicable, trailer). You will find the specifications in the manufacturer’s information.
Proper use : Only use the bicycle or e-bike within the intended category of use. Improper use leads to safety risks.
Accessories and modifications : Only use approved accessories such as child seats or trailers, and do not make any unauthorised modifications, particularly to the drive system of e-bikes.
3. Special instructions for e-bikes
Battery and charging:
Only use batteries and chargers approved by the manufacturer.
Charge the battery in safe locations and in accordance with the temperature specifications.
Remove the battery before transporting the e-bike.
Electric assistance:
Familiarise yourself with the assistance modes and the push assist. Test the e-bike first in a safe environment, particularly with varying loads or on difficult terrain.
Running-in disc brakes:
Run in new brakes before your first long ride to ensure optimum braking performance.
Transport guidelines:
When transporting the bike, follow the manufacturer’s instructions and comply with legal regulations.
Component manuals:
For detailed information on e-bike systems from drive component manufacturers, please see here:
For Fazua motors:
https://fazua.com/de/support/help-center/knowledge-base/fazua-app/
For Bosch motors:
https://help.bosch-ebike.com/de/help-center#wss-manuals
For Shimano motors:
https://lifestylebike.shimano.com/de/support/
4. Special safety rules for children’s bicycles
Duty of supervision: Children must only use bicycles under the supervision of a responsible adult.
Suitable size and equipment : Ensure that the bicycle is age-appropriate and that all safety features (e.g. brakes, reflectors, chain guard) are in good working order.
Loading and accessories : Securely attach child seats and luggage racks and ensure that the load capacity is not exceeded.
5. Care and maintenance
Cleaning : Use a soft cloth and mild cleaning agents. Avoid high-pressure washers to prevent damage to electrical and mechanical components.
Regular inspections : Schedule regular maintenance with a qualified specialist workshop to check for wear and tear and ensure safety.
Spare parts : Use only original or approved spare parts to maintain the bike’s functionality.
6. What to do after your ride
Document any damage : If there is visible damage or a malfunction, the bicycle must not be used any further. Have it checked by a specialist workshop.
Avoid hot components : Avoid contact with heated components such as brake discs or drive units to prevent burns.
Final notes
This safety information provides you with a comprehensive overview of the safe use of bicycles, e-bikes and children’s bikes. Always follow the manufacturer’s instructions for use and contact a specialist dealer if you have any questions. Safe and responsible use not only ensures your safety but also extends the life of your bike.
Online and on site
flexibly
performance ratio