Skip to main content Skip to search Skip to main navigation
100.000+ satisfied customers
Bike shop from the Black Forest
0% Finanzierung bis 12 Monate Laufzeit - bis 31.07.26 Mehr Infos
Exklusive Kalkhoff Sondermodelle ✨ Streng limitiert – Jetzt sichern!
Exklusive Focus Sondermodelle ✨Jetzt entdecken!
Frame Stealth Air Full Carbon, updated Zero Suspension System, 150 mm travel, Forward Geometry, integrated and removable battery, 12 x 148 mm Boost rear axle, tapered head tube, one-piece Monoblock upper rocker, internally routed cables and hoses (HHG), sealed ‘MAX-Capacity’ bearings, extra-large 15 mm axles, speed sensor integrated into the dropout, exclusive plastic motor covers.
Frame shape Mountainbike
Material Carbon
Gender Unisex
Weight approx. 18.7 kg
permissible total weight 150 kg
Fork Fox 36 29 Float GRIPX2 Factory Kashima, 160 mm, tapered head tube, 15 x 110 mm Boost Kabolt axle, 44 mm offset. Settings: High- and low-speed compression, high- and low-speed rebound, air preload
Damper Fox Float X Factory Kashima EVOL, 185 x 55 mm. Adjustments: Compression damping with 2 modes (Open/Firm), rebound damping, air preload. Trunnion mount at the top, lower bushings: 30 x 8 mm
Manufacturer shift group Sram
Rear derailleur SRAM GX Eagle AXS, Roller Bearing Clutch (T-type), Cage Lock, 1x12-speed
Number of gears 1 x 12
Circuit type Kettenschaltung
Crank handle e*thirteen Helix Core E*Spec Plus, all sizes: 160 mm
Cassette SRAM XS-1275, 10-52T, T-Type, 12-speed
Drive type Kettenantrieb
Freewheel/coaster Freilauf
Pedals included in the scope of delivery nein
Rims Mavic E-CrossTrail SL, 29 Boost, 30 mm internal width, hookless, tubeless-ready, 28 spokes
Hubs Front: Mavic Infinity hub, Boost 15 x 110 mm, IS 6-hole; Rear: Mavic Infinity hub, ID360 freehub technology, Boost 12 x 148 mm, IS 6-hole, XD freehub
Wheel size 29 Zoll
Tyres Front: Maxxis Minion DHF 29 x 2.5 WT, Tubeless Ready, 3C MaxxGrip rubber compound, EXO+ Protection, 60 TPI, folding bead; Rear: Maxxis Minion DHR II 29 x 2.5 WT, Tubeless Ready, 3C MaxxTerra rubber compound, EXO+ Protection, 60 TPI, folding bead
Motor manufacturer TQ
Engine TQ HPR-50
max. torque 50 Nm
Reach up to 80 km
Support for up to 25 km/h
Battery TQ HPR-50 360 Wh, integrated and removable
Display TQ HPR Display V01
Brakes Shimano XT M8120, 4-piston brake caliper, MT800 Ice-Tech 203 mm Centre Lock brake disc, synthetic resin brake pads with fin
Handlebars ONOFF S6 1.0 Carbon, rise: 25 mm, width: 800 mm, 8° horizontal bend/backsweep, 5° vertical bend/upsweep, 31.8 mm handlebar diameter. Sizes L and XL: rise 1.5.
Seat post Fox Transfer Factory Kashima, internal cable routing, Shimano SL-MT800-IL lever, adjustable travel, diameter 31.6 mm, size S: 95–120 mm, size M: 125–150 mm, size L: 155–180 mm, size XL: 185–210 mm
Saddle Fizik Terra Aidon Slim X5
Stem ONOFF S6 30 mm 0°, forged 6061 aluminium + CNC, 31.8 mm handlebar diameter
Accessories/Miscellaneous Charger included

A new era of e-bikes has begun. The new NEAT is a Mondraker bike through and through. It’s right at home in a new category that’s practically crying out to bear the Mondraker stamp.

The brand-new Mondraker NEAT is powered by the TQ-HPR50 motor and fed by an integrated, removable 360Wh battery. Lightweight e-MTB fun without compromise, but with all the Mondraker technologies, and weighing in at under 20kg. Mission accomplished. Now it’s your turn.

All NEAT models are based on the same frame made from STEALTH AIR CARBON and the TQ-HPR50 drive system with its integrated yet removable 360Wh battery. There are three trim levels: the NEAT R, NEAT RR and the top-of-the-range NEAT RR SL.

The NEAT is the perfect combination of our two signature models: the FOXY Carbon Enduro Bike and the Crafty Carbon e-MTB Enduro Bike. Its distinctive aesthetics, technology and unrivalled performance on the trail make the NEAT the benchmark for modern light e-MTBs.

The NEAT embodies what we see as the definition of the light e-MTB category and combines it with our very own MONDRAKER DNA:

  • The fusion of non-motorised enduro bikes with ‘Full Power’ e-MTBs.
  • The result is a 150mm enduro bike with a 160mm fork and enough motor power to make every ride even more fun. Lightweight, but not at any cost.


This bike arrives (almost) fully assembled. All you need to do is straighten the handlebars and fit the pedals.

0 from 0 Reviews

Average rating of 0 out of 5 stars

Give a rating!

Share your experience with the product with other customers.


Information on the manufacturer (information obligations under the GPSR Product Safety Regulation)
Blue Factory Team S.L.U.
Nicolas Copérnico 4
03203 Moose, Spain

Safety information for bicycles, e-bikes and children’s bikes

The safe and long-term use of bicycles, e-bikes and children’s bikes requires careful checks, regular maintenance and proper handling. These guidelines provide practical advice on safe use and should be followed in conjunction with the manufacturer’s instruction manual.



1. Safety checks before riding

The following checks should be carried out before every ride :

Brakes and steering : Test that the brakes are working properly and ensure that the steering is smooth and stable.

Tyres and wheels : Check that the tyre pressure is correct and that the wheels and quick-release skewers are securely fastened.

Fittings : Check that attachments such as mudguards, luggage racks, the saddle and pedals are securely fastened.

Accessories and loading : Ensure that luggage and accessories are correctly fitted and that the maximum load capacity is not exceeded.



2. Technical safety and permitted use

Component inspection: Regularly check safety-critical components such as the frame, fork, handlebars, seat post and brakes for damage. Do not use the bicycle if there are any visible defects.

Maximum load capacity : Observe the weight restrictions for the total weight (bicycle, rider, load and, where applicable, trailer). You will find the specifications in the manufacturer’s information.

Proper use : Only use the bicycle or e-bike within the intended usage category. Improper use poses safety risks.

Accessories and modifications : Only use approved accessories such as child seats or trailers, and do not carry out any unauthorised modifications, particularly to the drive system of e-bikes.



3. Special notes for e-bikes

Battery and charging:

Only use batteries and chargers approved by the manufacturer.

Charge the battery in safe locations and in accordance with the temperature specifications.

Remove the battery before transporting the e-bike.

Electric assistance:

Familiarise yourself with the assistance modes and the push assist function. Test the e-bike first in a safe environment, particularly when carrying different loads or on difficult terrain.

Running in disc brakes:

Run in new brakes before your first long ride to ensure optimum braking performance.

Transport guidelines:

When transporting the bike, follow the manufacturer’s instructions and comply with legal regulations.

Component manuals:

For detailed information on e-bike systems from drive component manufacturers, please see here:

For Fazua motors: 

https://fazua.com/de/support/help-center/knowledge-base/fazua-app/

For Bosch motors: 

https://help.bosch-ebike.com/de/help-center#wss-manuals

For Shimano motors: 

https://lifestylebike.shimano.com/de/support/



4. Special safety rules for children’s bicycles

Duty of supervision: Children must only use bicycles under the supervision of a responsible adult.

Suitable size and equipment : Ensure that the bicycle is age-appropriate and that all safety features (e.g. brakes, reflectors, chain guard) are in good working order.

Loading and accessories : Securely attach child seats and luggage racks, and take care not to exceed the load capacity.



5. Care and maintenance

Cleaning : Use a soft cloth and mild cleaning products. Avoid high-pressure washers to prevent damage to electrical and mechanical components.

Regular inspections : Schedule regular servicing with a qualified specialist workshop to check for wear and tear and ensure safety.

Spare parts : Only use original or approved spare parts to maintain the bike’s functionality.



6. What to do after your ride

Document any damage : If there is any visible damage or malfunction, do not continue to use the bicycle. Have it checked by a specialist workshop.

Avoid hot components : Avoid contact with hot components such as brake discs or drive units to prevent burns.



Final notes

This safety information provides you with a comprehensive overview of the safe use of bicycles, e-bikes and children’s bikes. Always follow the manufacturer’s instruction manual and contact a specialist retailer if you have any questions. Safe and responsible use not only ensures your safety but also extends the service life of your bicycle.

Skip product gallery

suitable accessories

Average rating of 5 out of 5 stars

SKS X-Blade 29" rear black
€29.95
 

Average rating of 5 out of 5 stars

SKS Shockblade 29 inch front black
€29.95
 

Average rating of 4.6 out of 5 stars

Cube ACID lighting set PRO 30 with StVZO approval
€39.95
 
Skip product gallery

suitable clothing

Advice & service:
Online and on site
pay securely &
flexibly
best price-
performance ratio