Cube Reaction Hybrid Pro Allroad 625Wh used bike 29 inches, size XL

Important safety information for electric bicycles

The safety information is part of the operating instructions, which contain all relevant information.

The digital operating instructions can be accessed here www. Cube.eu/downloads.

Reading the safety information does not exempt you from the obligation to read and observe the operating instructions!

Failure to observe the operating instructions may result in dangerous riding situations, falls, accidents and damage to property.

General

Failure to use the product as intended may result in component and material failure, leading to accidents and injuries:

Observe the restrictions of the specified usage class/bike classification

Do not exceed the permissible total weight (electric bike + rider + load + trailer, if applicable)

Observe the manufacturer's specifications for transporting people and loads

Manipulation of the drive system, in particular tuning, is not permitted.

Check the electric bicycle for possible damage before each ride, especially to the frame, fork, handlebar/stem unit, drive unit and seat post.

Do not use the electric bicycle if you notice any damage.

Be aware of the increased risk of injury due to potentially high temperatures of individual components (e.g. brakes, drive unit, headlight).

Observe the manufacturer's specifications for attaching accessories (bags, locks, child seats, carrier systems, etc.) and for using a trailer.

Observe the legal regulations applicable in the respective country for use on public roads

When transporting the electric bicycle, the information provided by the manufacturer, the legislator or the transport company must be observed

Before driving

Before each journey, check the following in particular:

the correct functioning of brakes, steering, chassis and lighting,

the secure fit of the handlebars, stem, wheels, mudguards and pedals, as well as

the tyre pressure

Checks and adjustments must be carried out in accordance with the manufacturer's specifications.

Handling

Initially familiarise yourself with the riding and braking behaviour as well as the electric assistance modes and the push assist (if available), especially with different loads, wet conditions and loose ground.

After riding / maintenance

In the event of damage or malfunction, the electric bicycle must be checked by a specialist before further use.

Have the electric bike checked and serviced regularly by a specialist company in accordance with the manufacturer's specifications in order to avoid hazards, e.g. due to wear and tear.

Observe the specified torques (Nm) for the assembly of components.

Only use batteries and chargers approved by the manufacturer.

Observe the manufacturer's specifications for charging and using the battery, especially with regard to ambient temperature and location of charging.

Only use undamaged and unmodified batteries and chargers.

Modifying the attachments on your electric bike may affect its safety and approval. Contact your specialist dealer before undertaking any such work.

Contact your specialist dealer if you are unable to carry out the work described on your electric bike yourself (e.g. making adjustments), if you feel unsure or if you do not have the right tools.

Important safety information for bicycles

The safety information is part of the operating instructions, which contain all relevant information.

The digital operating instructions can be accessed here www. Cube.eu/downloads.

Reading the safety information does not exempt you from the obligation to read and observe the operating instructions!

Failure to observe the operating instructions may result in dangerous riding situations, falls, accidents and damage to property.

General

Failure to use the product as intended may result in component and material failure, leading to accidents and injury:

Observe the restrictions of the specified usage class/bike classification

Do not exceed the permissible total weight (bike + rider + load + trailer, if applicable)

Check the bicycle for possible damage before each ride, especially the frame, fork, handlebar/stem unit and seat post.

Do not use the bicycle if you notice any damage.

Be aware of the increased risk of injury due to potentially high temperatures of individual components (e.g. brakes, headlights).

Observe the manufacturer's instructions for attaching accessories (bags, locks, child seats, carrier systems, etc.) and for using a trailer.

Observe the legal regulations applicable in the respective country for use on public roads

When transporting the bicycle, observe the instructions provided by the manufacturer, the legislator or the transport company.

Before riding

Before every journey, check the following in particular:

the correct functioning of brakes, steering, chassis and lighting,

the secure fit of the handlebars, stem, wheels, mudguards and pedals, as well as

the tyre pressure

Checks and adjustments must be carried out in accordance with the manufacturer's specifications.

Handling

Initially, familiarise yourself with the driving and braking behaviour, especially with different loads, wet conditions and loose surfaces.

After riding / maintenance

In the event of damage or malfunction, the bicycle must be checked by a specialist before further use.

Have the bicycle checked and serviced regularly by a specialist workshop in accordance with the manufacturer's specifications to avoid hazards, e.g. due to wear and tear.

Observe the specified torques (Nm) for the assembly of components.

Contact your specialist dealer if you are unable to carry out the work described on your bicycle yourself (e.g. making adjustments), if you feel unsure or if you do not have the right tools.

Important safety information for children's bicycles

The safety information is part of the operating instructions, which contain all relevant information.

The digital operating instructions can be accessed here www. Cube.eu/downloads.

Reading the safety information does not exempt you from the obligation to read and observe the operating instructions!

Failure to observe the operating instructions may lead to dangerous riding situations, falls, accidents and damage to property.

General

The bicycle may only be used under the supervision of a parent or guardian.

Failure to use the bicycle as intended may result in component and material failure, posing a risk of accident and injury:

Observe the restrictions of the specified usage class/bike classification.

Do not exceed the permissible total weight (bike + rider + load + trailer, if applicable)

Check the bicycle for possible damage before each ride, especially the frame, fork, handlebar/stem unit and seat post.

Do not use the bicycle if you notice any damage.

Be aware of the increased risk of injury due to potentially high temperatures of individual components (e.g. brakes, headlights).

Observe the manufacturer's instructions for attaching accessories (bags, locks, child seats, carrier systems, etc.) and for using a trailer.

Observe the legal regulations applicable in the respective country for use on public roads

When transporting the bicycle, observe the instructions provided by the manufacturer, the legislator or the transport company.

Before riding

Before every journey, check the following in particular:

the correct functioning of brakes, steering, chassis and lighting,

that the handlebars, stem, wheels, mudguards and pedals are securely fastened,

the tyre pressure

Checks and adjustments must be carried out in accordance with the manufacturer's specifications.

Handling

Initially familiarise yourself with the driving and braking behaviour, especially with different loads, wet conditions and loose surfaces.

After riding / maintenance

In the event of damage or malfunction, the bicycle must be checked by a specialist before further use.

Have the bicycle checked and serviced regularly by a specialist workshop in accordance with the manufacturer's specifications to avoid hazards, e.g. due to wear and tear.

Observe the specified torques (Nm) for the assembly of components.

Contact your specialist dealer if you are unable to carry out the work described on your bicycle yourself (e.g. making adjustments), if you feel unsure or if you do not have the right tools.