Focus Jam2 6.7 625Wh Used bike 29 inches, size M

Important safety information for electric bicycles The safety information is part of the operating instructions, which contain all relevant information. The digital operating instructions can be accessed here www. Cube.eu/downloads. Reading the safety information does not exempt you from the obligation to read and observe the operating instructions! Failure to observe the operating instructions can lead to dangerous riding situations, falls, accidents and damage to property. General Failure to use the product as intended can lead to component and material failure, resulting in accidents and injuries: Observe the restrictions of the specified usage class / bike classification Do not exceed the permissible total weight (electric bike + rider + load + trailer, if applicable) Observe the manufacturer's specifications for transporting people and loads Manipulation of the drive system, in particular tuning, is not permitted Check the electric bike for possible damage before each ride, in particular the frame, fork, handlebar/stem unit, drive unit and seat post Do not use the electric bicycle if you notice any damage Be aware of the increased risk of injury due to potentially high temperatures of individual components (e.g. brakes, drive unit, headlight) Follow the manufacturer's instructions for attaching accessories (bags, locks, child seats, carrier systems, etc.) and for the use of a trailer Observe the legal regulations applicable in the respective country for use on public roads When transporting the electric bicycle, observe the specifications of the manufacturer, the legislator or the transport company Before riding Before each ride, check in particular: the correct functioning of brakes, steering, chassis and lighting, the secure fit of the handlebars, stem, wheels, mudguards and pedals, and the tyre pressure Checks and adjustments must be carried out in accordance with the manufacturer's specifications. Riding behaviour Initially, familiarise yourself with the riding and braking behaviour as well as the electric assistance modes and the push assist (if available), especially with different loads, wet conditions and loose ground After the ride / maintenance In the event of damage or malfunction, the electric bike must be checked by a specialist before further use Have the electric bike checked and serviced regularly by a specialist in accordance with the manufacturer's specifications to avoid hazards, e.g. due to wear and tear Observe the specified torques (Nm) for the assembly of components. Only use batteries and chargers approved by the manufacturer. Observe the manufacturer's specifications for charging and using the battery, especially with regard to ambient temperature and location of the charging process. Only use undamaged and unmodified batteries and chargers. Any modification to the attachments on the electric bicycle may affect safety and approval. Contact your specialist dealer before undertaking any such work. Contact your specialist dealer if you are unable to carry out the work described on your electric bike (e.g. making adjustments) yourself, if you feel unsure or if you do not have the right tools. Important safety information for bicycles The safety information is part of the operating instructions, which contain all relevant information. The digital operating instructions can be accessed here www. Cube.eu/downloads. Reading the safety information does not exempt you from the obligation to read and observe the operating instructions! Failure to observe the operating instructions can lead to dangerous riding situations, falls, accidents and damage to property. General Failure to use the product as intended may result in component and material failure, leading to accidents and injury: Observe the restrictions of the specified usage class/bike classification Do not exceed the permissible total weight (bike + rider + load + trailer, if applicable) Check the bicycle for possible damage before each ride, especially the frame, fork, handlebar/stem unit and seat post. Do not use the bicycle if you notice any damage. Be aware of the increased risk of injury due to potentially high temperatures of individual components (e.g. brakes, headlights). Follow the manufacturer's instructions for attaching accessories (bags, locks, child seats, carrier systems, etc.) and for the use of a trailer. Observe the legal regulations applicable in the respective country for use on public roads. When transporting the bicycle, observe the instructions of the manufacturer, the legislator or the transport company. Before riding Before each ride, check in particular: the correct functioning of brakes, steering, chassis and lighting, the secure fit of the handlebars, stem, wheels, mudguards and pedals, and the tyre pressure Checks and adjustments must be carried out in accordance with the manufacturer's specifications. Handling Familiarise yourself with the handling and braking characteristics, especially with different loads, wet conditions and loose surfaces. After riding / maintenance In the event of damage or malfunction, the bicycle must be checked by a specialist before further use. Have the bicycle checked and serviced regularly by a specialist in accordance with the manufacturer's specifications to avoid hazards, e.g. due to wear and tear. Observe the specified torques (Nm) for the assembly of components. Contact your specialist dealer if you are unable to carry out the work described on your bicycle (e.g. making adjustments) yourself, if you feel unsure or if you do not have the right tools. Important safety information for children's bicycles The safety information is part of the operating instructions, which contain all relevant information. The digital operating instructions can be accessed here www. Cube.eu/downloads. Reading the safety information does not exempt you from the obligation to read and observe the operating instructions! Failure to observe the operating instructions can lead to dangerous riding situations, falls, accidents and damage to property. General The bicycle may only be used under the supervision of a parent or guardian. Failure to use the bicycle as intended may result in component and material failure, posing a risk of accident and injury: Observe the restrictions of the specified usage class/bike classification. Do not exceed the permissible total weight (bicycle + rider + load + trailer, if applicable). Check the bicycle for possible damage before each ride, especially the frame, fork, handlebar/stem unit and seat post. Do not use the bicycle if you notice any damage. Be aware of the increased risk of injury due to potentially high temperatures of individual components (e.g. brakes, headlights). Follow the manufacturer's instructions for attaching accessories (bags, locks, child seats, carrier systems, etc.) and for the use of a trailer. Observe the legal regulations applicable in the respective country for use on public roads. When transporting the bicycle, observe the instructions of the manufacturer, the legislator or the transport company. Before riding Before each ride, check in particular: the correct functioning of brakes, steering, chassis and lighting, the secure fit of the handlebars, stem, wheels, mudguards and pedals, and the tyre pressure Checks and adjustments must be carried out in accordance with the manufacturer's specifications. Handling Familiarise yourself with the handling and braking characteristics, especially with different loads, wet conditions and loose surfaces. After riding / maintenance In the event of damage or malfunction, the bicycle must be checked by a specialist before further use. Have the bicycle checked and serviced regularly by a specialist in accordance with the manufacturer's specifications to avoid hazards, Observe the specified torques (Nm) for the assembly of components Contact your specialist dealer if you are unable to carry out the work described on your bicycle yourself (e.g. making adjustments), if you feel unsure or if you do not have the right tools