Skip to main content

Equipped with RockShox's revolutionary Flight Attendant suspension system, the 4060 ST LTD takes trail riding to the next level. Advanced electronics analyse rider input and terrain data in real time to dynamically find the optimal suspension setup. With the 4060 ST LTD, you can rely on the optimum suspension setup in every situation and concentrate fully on the trail and let your play instinct run free.

Carbon frame
Developed for dynamic riding behaviour, manufactured with precision. Carefully processed high-end carbon fibres ensure a frame that is light, stiff and robust enough for tough trail use - and can withstand the occasional bump, riding error or crash.

First-class suspension
Our Lower Link Activated Virtual Pivot kinematics in combination with durable Enduro Max bearings offer the best grip and progressive support when you go all out. The intelligent design ensures a precise, agile ride feel and is compatible with air shocks and coil shocks.

Mounting eyelets for accessories
Whether it's a spare tube or a banana: the mounting eyelets on the underside of the top tube offer you a clean mounting solution for accessories without scratching your frame. Or for the to-go banana.



This bike arrives (almost) fully assembled. All you have to do is straighten the handlebars and attach the pedals.

Frame SCOR 4060 Full Carbon Frame | Lower-Link Driven Instant Centre Linkage | 140 / 160mm Rear Wheel Travel | Fully Guided Internal Cable Routing | Stash Box | Boost 148 | SRAM UDH | Lower ISCG 05 Mount / Chainguide
Material Carbon
Gender Unisex
Weight approx. 14.7 kg
Fork RockShox Lyrik Ultimate Flight Attendant | 150mm Travel | 44mm Rake
Damper RockShox Super Deluxe Flight Attendant RC3 Hydraulic Bottom Out | 205 x 57.5mm Trunnion
Switching group SRAM X01 Eagle
Manufacturer shift group Sram
Gear lever SRAM X01 Eagle
Rear derailleur Sram X01 Eagle, 12-Speed
Number of gears 1 x 12
Crank handle SRAM X01 Flight Attendant Carbon | 170mm Length
Cassette SRAM X01 XG-1295 Eagle
Pedals included in the scope of delivery nein
Rims DT Swiss XM 1700 SPLINE | 30mm Internal Width | Tubeless ready
Hubs DT Swiss 350 | Ratchet SL Freehub | Straightpull Spoke Interface | Boost spacing
Wheel size 29 Zoll
Tyres Maxxis Assegai 29 x 2.5" 3C MaxxTerra Exo TR (F) | Maxxis Dissector 29 x 2.4" 3C MaxxTerra Exo+ TR (R)
Brakes SRAM Code RSC
Handlebars SCOR Carbon Bar | 31.8mm Clamp | 800mm Wide | 20mm Rise | 5° Upsweep | 7.5° Backsweep
Seat post Bikeyoke Divine | S 125mm | M 160mm | L / XL 185mm Travel | Triggy Alpha lever
Saddle WTB Silverado Medium Titanium
Stem Burgtec Enduro MK3 | 31.8mm Bar Bore | 35mm Length | 0° Angle

0 from 0 Reviews

Average rating of 0 out of 5 stars

Give a rating!

Share your experience with the product with other customers.


Information on the manufacturer (information obligations under the GPSR Product Safety Regulation)
BMC Switzerland AG
Sports road 49
2540 Grenchen, Switzerland
+41 32 654 14 54
info@bmc-switzerland.com
Details of the responsible person (information obligations under the GPSR Product Safety Regulation)
BMC France SAS
Quai du Commerce 12
F-69009 Lyon , France
+41 32 654 14 54
info@bmc-switzerland.com

Safety information for bicycles, e-bikes and children's bicycles

The safe and long-term use of bicycles, e-bikes and children's bicycles requires careful checks, regular maintenance and proper handling. These instructions provide you with practical recommendations for safe use and should be taken into account in conjunction with the operating instructions of the respective manufacturer.



1. Safety checks before riding

The following checks should be carried out before every journey:

Brakes and steering: Test the functionality of the brakes and ensure that the steering is smooth and stable.

Tyres and wheels: Check that the tyres are correctly inflated and that the wheels and quick-release skewers are secure.

Fastenings: Check that attachments such as mudguards, pannier racks, saddle and pedals are securely fastened.

Accessories and load: Ensure that luggage and accessories are correctly fitted and that the permitted load capacity is not exceeded.



2. Technical safety and authorised use

Component inspection: Regularly inspect safety-relevant components such as the frame, fork, handlebars, seat post and brakes for damage. Do not use the bike if there are visible defects.

Maximum load capacity: Observe the weight limits for the total weight (bike, rider, payload and trailer, if applicable). The details can be found in the manufacturer's information.

Proper use: Only use the bike or e-bike within the scope of the intended use category. Improper use leads to safety risks.

Accessories and modifications: Only use approved accessories such as child seats or trailers and do not make any unauthorised modifications, especially to the drive system of e-bikes.



3. Special instructions for e-bikes

Battery and charging process:

Only use batteries and chargers approved by the manufacturer.

Charge the battery in a safe place and in accordance with the temperature specifications.

Remove the battery before transporting the e-bike.

Electric assistance:

Familiarise yourself with the assistance modes and the pushing aid. Test the e-bike in a safe environment first, especially with different loads or difficult ground conditions.

Running in the disc brakes:

Run in new brakes before your first big ride to ensure optimum braking performance.

Transport specifications:

Observe the manufacturer's instructions and legal regulations when transporting.

Component manuals:

For detailed information on e-bike systems from drive component manufacturers, find help here:

For Fazua motors:

https://fazua.com/de/support/help-center/knowledge-base/fazua-app/

For Bosch motors:

https://help.bosch-ebike.com/de/help-center#wss-manuals

For Shimano motors:

https://lifestylebike.shimano.com/de/support/



4. Special safety rules for children's bikes

Duty of supervision: Children may only use bicycles under the supervision of a responsible person.

Appropriate size and equipment: Make sure that the bike is age-appropriate and that all safety devices (e.g. brakes, reflectors, chain guard) are intact.

Loading and accessories: Attach child seats and pannier racks securely and ensure that the load capacity is not exceeded.



5. Care and maintenance

Cleaning: Use a soft cloth and mild cleaning agents. Avoid high-pressure cleaners to prevent damage to electrical and mechanical components.

Regular inspections: Schedule regular maintenance at a qualified specialist company to check for wear and ensure safety.

Spare parts: Only use original or approved spare parts to maintain the functionality of the bike.



6. Behaviour after the ride

Documenting damage: In the event of recognisable damage or malfunctions, the bike must not be used any further. Have it checked by a specialised company.

Avoid hot components: Avoid contact with heated components such as brake discs or drive units to prevent burns.



Final notes

This safety information provides you with a comprehensive overview for the safe use of bicycles, e-bikes and children's bicycles. Always follow the operating instructions of the respective manufacturer and contact a specialist dealer if you have any questions. Safe and responsible handling not only ensures your safety, but also extends the service life of your bike.

Advice & service:
Online and on site
pay securely &
flexibly
best price-
performance ratio